Logo of the Ludwig Nano Präzision GmbH logo in light gray and blue

Let's forget the pressure, get LNP to measure

Regardless of whether it is a prefabricated component or a material sample, with us you have all the options for material testing. With our contract measurement service, everything is put through its paces and you can be sure of the quality of your workpieces!

We test all common Materials, but also small and complex prefabricated components.
Numerous test series and scientific reviews ensure that the results of micro-components that fall outside the standard are still comparable to standard values.

Everyone needs precise measuring technology in quality assurance!  In our service programm we have over 20 procedures that cover material testing from front to back. Single measurements as well as multiple measurements with an infinite number of measuring points(depending on the sample size) are  possible without any problems. Of course, fully automatically.

Material testing with LNP®

Our new service for you

Sometimes the present test equipment is not sufficient, more precise and flexible devices are neccesary but not in the budget…
Fortunately, you don’t always need an expensive device!
Use the immense possibilitys of the LNP® nano touch system simply via our new contract measurement service.

Measureable materials

Our flexible test system, based on the LNP® nano touch enables us to test a large number of materials. Here is a selection of examples.
  • Plastics
  • Elastomers
  • Natural rubber products
  • Neopren
  • Thiokol
  • Flexible polyacrylate ester
  • Polyester
  • Soft PVC
  • Nitrile
  • Rubber in all degrees of hardness
  • Cellular rubber
  • Acryl glass
  • Polystyrene
  • Resopal
  • Textile fabrics
  • Low density textile windings
  • Soft elastic materials
  • Pressure rollers
  • Nylon
  • Orlon
  • Perlon
  • Rayon
  • Foam rubber
  • Foam plastic
  • Cellular rubber
  • Thermoplastic elastomers
  • Rigid Foam
  • Wax
  • Fur
  • Leather
  • Wood

Shore methods

 
SHORE 00 ASTM 2240
SHORE 000 ASTM 2240
SHORE A MICRO
Shore A
Shore A0/ Shore E
SHORE B
Shore C
Shore D
SHORE D0
SHORE A/M ASTM 2240
IRHD-H
IRHD-L
IRHD-M ISO 48
Modifizierte IRHD-M-Messung
IRHD-N

IRHD methods

More analysis- & standard test methods

 
VLRH DIN ISO 27588
FLEXULAR MODULUS DIN ISO 178
HARDNESS TOPOGRAPHY
ADHESION
YOUNGS MODULUS
YOUNG’S MODULUS BY LNP®
MICROTRIBOLOGY
RHEOLOGY
SPATIALLY RESOLVED DMA
Gelber unbeschädigter O-Ring, der zerstörungsfrei gemessen werden soll

Non-destructive

Doesn’t your workpiece look perfect? We analyze exactly and find the last weak point.

Animation: Ein poröser O-Ring zerfällt in Einzelstücke

Destructive

We can artificially destroy and age materials and workpieces .

Simulation of material and workpiece loads

For example, artificial aging through exposure to heat.

Experts to help

Our highly qualified specialist staff is used in device development as well as in contract measurement. This means that your order is always in the hands of experts.

Automation

To which test procedures does this apply? It’s simple: all of them!

Sensitivity

Suitable for micro components and small workpieces as well as hard-to-reach places where standard test methods are not sufficient.

Quality deviations

The overall quality of parts can easily be determined (depending on their size) with an infinite number of measuring points.

Personalized processes

We create individual measurement processes for you as well as individual sample holders for special measurement geometries. No more choosing of sample geometries, no more cutting samples.

YOUR BENEFITS

We can measure your samples very fast. The time may vary depending on the method and the number of measuring points.

You will receive the results in advance as an e-mail.

Our measuring systems

Do you have enough measurement work for a whole machine? You can find more information about our innovative measuring systems here!

More information?

Or just give us a call!