What is the youngs modulus LNP®?
The determination method by LNP calculates the young’s modulus at any point of load and unloading curve. Implementation of more accurate and faster measurements on delicate prefabricated parts.
Processing characteristics:
The diagrams show the possibilities of multiple measurements of the E-module according to LNP. This can also be done on several materials at the same time. Here on two plastics and one rubber.
- Materials: Polymers, Elastomers
- Multi-point measurements possible
- Probe tip geometry: Spherical surface, Berkovich and Vickers
![](https://lnp-systems.com/wp-content/uploads/2020/09/LNP-Grafik_loading-curve3_emodul_diagramm.png)
![](https://lnp-systems.com/wp-content/uploads/2020/09/LNP-Grafik_loading-curve_emodul_diagramm.png)
![](https://lnp-systems.com/wp-content/uploads/2020/09/LNP-Grafik_loading-curve2_emodul_diagramm.png)
Curious about more analysing methods at LNP® ?
Read also:
![](https://lnp-systems.com/wp-content/uploads/2020/09/Adhaesion-PostIT_0191-350x350.png)
Adhesion
Naturally the LNP® nano touch can not only measure the measurement force while penetrating the workpiece, but also while leaving…
![](https://lnp-systems.com/wp-content/uploads/2020/09/DSC_0069-350x350.png)
Microtribology
Normal force and friction force can be measured in one run, there are also continuous registration options as well as…
![Nahaufnahmen: Rubintastspitze bei Dreipunktmesung an S2 Stab](https://lnp-systems.com/wp-content/uploads/2020/09/DSC3_0009publisher-350x350.png)
Flexural modulus
A great advantage of the LNP® nano touch is that you only needone device for the three- and two-point measurements.